Consumers (where machinery is intended for use by consumers).
ISO 14122-1:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g.
The other parts are.
All four parts have been updated in 2016 and were Harmonised to the European Machinery Directive 2006/42/EC on 9 September 2016.Contents of BS EN ISO 14122-2: Foreword, introduction 1 Scope 2 Normative references 3 Terms and definitions 4 General requirements.1 General.1.1 Construction age of mythology german language.dll and materials.1.2 Safety of operators.2 Specific requirements.2.1 Location.2.2 Dimensions.2.3 Facilities or equipment.2.4 Floorings.2.5 Design.This part of the standard is not applicable to machinery manufactured before the date of its publication.For the significant hazards covered by this part of ISO 14122, see Clause.Foldable, slidable) and movable parts of fixed means of access.It also supplies guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.Extra material, in addition to providing ample information about BS EN ISO 14122, the White Paper lists useful resources and sources of further information.It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.For the significant hazards covered by this part of BS EN ISO 14122, see Clause.Who is the standard for?
Furthermore, although the standard is not applicable retrospectively, anyone who is concerned about the adequacy and safety of an existing permanent means of access will also benefit from reading the White Paper.
While not mandatory, it is highly recommended that the relevant parts of the standard are referred to, whether the intention is to use custom-designed or modular access systems manufactured from steel, stainless steel, aluminium or another material.
It is applicable to permanent means of access which are a part of a stationary machine, skater boy game on ipad and also to non-powered adjustable parts (e.g.
This part also applies to working platforms and walkways specific to the machine which are not permanently fixed to the machine and which may be removed or moved to the side for some operations of the machine (e.g.
What does the standard cover?
The purchase cost includes worldwide delivery via UPS direct from BSI headquarters.It applies to permanent means of access which are a part of a stationary machine and also to non-powered adjustable parts (e.g.It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122.Choice of fixed means and general requirements of access.It applies to both stationary and mobile machinery where a fixed means of access is necessary.Part 3 : Stairs, stepladders and guard-rails.ICS Classification :.110, iSBN.This standard defines the general requirements for safe access to machines and gives advice about the correct choice of access.Safety of Machinery Set: ISO 14122 / ISO1412.